|
|
Circuits > Automotive > Lighting Third Brake Light
Lighting Third Brake Light
Additional Notes
What's so special about this circuit? Well, the first third-brake light I
installed I had to pull a wire from the Third Brake Light all the way to the
brake pedal switch and I thought it would be easier to pluck the signal of both
brakelights via the trunk. Bench-test your circuit first and apply power to the
circuit, with the brakelight connected, for at least a couple of minutes. If
the two SCR's are getting hot (depending on the type of bulb in your 3rd brake
light), mount coolribs on them. I used the NTE5483 which is a 8A, 200Vrm type.
Title: Lighting Third Brake Light
Source: http://www.uoguelph.ca/~antoon
Published on: 2005-08-15
Reads: 610
Print version: 
Circuits > Automotive > Lighting Third Brake Light |
|
