|
|
Circuits > Audio > Electronics Attenuator
Electronics Attenuator
Two low voltage, low power zeners are used to control electronically the
level of an audio signal. The attenuation range is from 6 to 58dB for an input
current from 0.042 to 77 mA corresponding to a control voltage from 2.7 to 7.5V.
If control voltage is limited to 5V, the attenuation is around 30dB at a control
current of 2mA. This is not an HiFi attenuator but might come useful as a
general purpose audio attenuator.
Title: Electronics Attenuator
Source: www.electronics-lab.com
Published on: 2005-02-01
Reads: 556
Print version: 
Circuits > Audio > Electronics Attenuator |
|
